MENU
Products
  1. Home
  2. /
  3. Products
  4. /
  5. Shaking Table

Shaking Table

In the metallurgical industry, shaker table is mineral processing equipment used for sorting fine material.

Email: [email protected]

Get a Quote Send Inquiry

In the metallurgical industry, shaker table is mineral processing equipment used for sorting fine material. Traditional single-layer shaker table covers large area and has low capacity. The launch of double-layer shaker table solves available problems in the use of single-layer shaker table. Double-layer shaker table has the features of small footprint, large capacity and relatively low cost, energy saving, high separation efficiency, easy to adjust, etc.

Installation and Commissioning of Shaker Table

1. Before installation, you should make product quality test: check before installation, bed parts shall be complied with the drawings, and other parts should be intacted.

2. Lifting bed should be set with good connectors and four connection blocks, and adjust the height and the exact location, and the installation center of the bed should be consisted with connector center.

3. The hammock should prevent the compressional deformation of side plate and non-collision bed.

4. After the installation of the bed, each connected screw hole should be aligned, and the gap between the support joints should be not too large to prevent the generation of sound and wear.

5. After checking the installation of the connection, check that if the bed is functioning smoothly, and the connection part is loose, shake or the sliding lubrication is good and no abnormal noise.

6. The empty running is completed without problems, the equipment can work normally.

Features of Shaking Table

1. The movement of high-quality cast iron and NSK bearings mechanical are more durable.

2. The unique motor is overheating, the temperature out of control will lead to automatic power-off to protect device.

3. The whole quiet design.

4. Convenient design, so that the oscillation amplitude adjustment is easy to complete.

5. Intelligent sound and light alarm environmental scans micro-processing controller.

6. Encryption lock operating parameters can avoid human errors.

7. The run parameter memory function can avoid cumbersome operation.

Why choose us?

1. Fine discharge particle, better finished product particle, less powder, cheaper price.

2. Can reach better efficiency by crushing hardness material, especially for pebble.

3. Long lifespan of wearing parts.

4. Small footprint, easy operation, durable working hours, reliable performance, simple maintenance, simple structure.

Technical Data

Name Grit 
concentrator
 table
Fine sand 
concentrator
 table
Sludge 
concentrator
 table
Bed surface 
Dimensions
Length
(mm)
4450 4450 4450
Driving 
part Width
(mm)
1855 1855 1855
Concentrate 
part Width
(mm)
1546 1546 1546
Max.feeding 
size(mm)
2 0.5 0.15
Feeding 
amount
(t/d)
30-60 10-20 15-25
Feeding 
thickness
(%)
25-30 20-25 15-25
Stroke
(mm)
16-22 11-16 8-16
Frequency
(f)
45-48 48-53 50-57
Bed surface 
Water quantity
(t/d)
80-150 30-60 10-17
Bed surface 
Horizontal 
obliquity(°)
2.5-4.5 1.5-3.5 1-2
Bed surface 
Portrait 
obliquity(%)
1.4 0.92 ----
Table board 
corner(°)
32-42 40 42
Concentrating 
area(㎡)
7.6 7.6 7.6
Bed surface 
Length ratio
2.6 2.6 2.6
Shape of 
side-bed 
surface
Rectangle Zigzag Triangle
Motor 
power(kw)
1.1 1.1 1.1
Transmission 
device
Eccentricity Linkage
What Can I Do For You?

You can also send a message to us by this email [email protected], we will reply tu you within 24 hours.Now tell us your need,there will be more favorable prices!

totop
online